Cold Shrink Tubing/Termination weatherproofing kit
Speedy, Safe, Solid Wire Connections for Any Low-Voltage Application
What's special about this wire insulation?
- Insulates wires and connectors at the termination point, sealing your connection from the elements
- Shrinks by removing the internal core wire instead of applying heat, increasing installation and speed and safety over heat shrink tubing
- Standalone installation eliminates the need for heat guns or torches, saving money
- Available in 9 sizes from 3/4" to 4-1/8", there is sure to be a size for your application
Features
- Seals out moisture, dust, and debris to prevent corrosion to cables and connectors for a reliable, long lasting electrical connection
- Since no heat is used, there is no risk of personnel injury due to burning, guaranteeing safety during installation
- UV resistant material makes the tubing usable outdoors
- Ideal for creating fast and firm wire terminations in low voltage applications, including A/V, communications, and coaxial applications
Specifications
| Part # | Diameter | Cable Diameter | Tube Length | Weight | ||
| Minimum | Maximum | Minimum | Maximum | |||
| HW-CS-075-2 | 0.75" (1.90 cm) | 0.31" (0.78 cm) | 0.55" (1.39 cm) | 2" (5.08 cm) | 3.2" (8.12 cm) | 1 oz (28.34 g) |
| HW-CS-075-4.3 | 0.75" (1.90 cm) | 0.31" (0.78 cm) | 0.55" (1.39 cm) | 4.3" (10.92 cm) | 6" (15.24 cm) | 2 oz (56.69 g) |
| HW-CS-100-5.5 | 1" (2.54 cm) | 0.39" (0.99 cm) | 0.79" (2.00 cm) | 5.5" (13.97 cm) | 7" (17.78 cm) | 3 oz (85.04 g) |
| HW-CS-100-9 | 1" (2.54 cm) | 0.39" (0.99 cm) | 0.79" (2.00 cm) | 9" (22.86 cm) | 11" (27.94 cm) | 4 oz (113.3 g) |
| HW-CS-125-8 | 1.25" (3.17 cm) | 0.47" (1.19 cm) | 1.10" (2.79 cm) | 8" (20.32 cm) | 11" (27.94 cm) | 4 oz (113.3 g) |
| HW-CS-1625-6 | 1.625" (4.12 cm) | 0.69" (1.75 cm) | 1.30" (3.30 cm) | 6" (15.24 cm) | 8" (20.32 cm) | 4 oz (113.3 g) |
| HW-CS-2125-5.1 | 2.125" (5.39 cm) | 0.98" (2.48 cm) | 1.81" ( 4.59 cm) | 5.1" (12.95 cm) | 8" (20.32 cm) | 6 oz (170 g) |
| HW-CS-275-6 | 2.75" (6.98 cm) | 1.26" (3.20 cm) | 2.56" (6.50 cm) | 6" (15.24 cm) | 8" (20.32 cm) | 7 oz (198.4 g) |
| HW-CS-4125-6.7 | 4.125" (10.47 cm) | 1.69" (4.29 cm) | 3.70" (9.39 cm) | 5.5" (13.97 cm) | 7" (17.78 cm) | 13 oz (368.5 g) |
| Property | Value |
|---|---|
| Material | Rubber |
| Color | Black |
| Application | Low-Voltage Only |
| Test Item | Test Method | Test Condition | Result | |
|---|---|---|---|---|
| Ozone Aging | ASTM D1149-7 (method B, procedure B1) |
Elongation: 20% Pretreatment Temperature: 104°F (40°C) Testing Temperature: 104°F (40°C) Pretreatment Period: 24 hours Exposure Period: 72 hours Ozone Concentration: 50mPa |
No Cracking | |
| UV Exposure | 105-A02: 1993 Cor2:2005 |
Exposure Cycle: ASTM G154-06 cycle 1 Lamp Type: UVA-340 8h UV at (60+/-3)°C BPT, 0.89W/;(m2nm)@340nm |
No Cracking | |
| Tensile Strength | ASTM D412-062 (method A) |
Specimen: Die C Specimen Thickness: 2.22mm Testing Speed: 500mm/min Gage Length: 25mm |
As Received | 10.5MPa |
| After 1000 hours of UV Exposure | 10.2MPa | |||
| Retention Rate | 97.1% | |||
| Elongation at Break | ASTM D412-062 (method A) |
Specimen: Die C Specimen Thickness: 2.22mm Testing Speed: 500mm/min Gage Length: 25mm |
As Received | 711% |
| After 1000 hours of UV Exposure | 719% | |||
| Retention Rate | 101.1% | |||